Wooden Gates in Portishead
Perimeter Fencing and Landscaping designs and builds handmade wooden gates for homes across Bristol, Bath, Portishead, and the wider surrounding areas, supplied on their own or fully installed with fencing.
Handmade Wooden Gates, Supplied and Installed
Perimeter Fencing and Landscaping makes wooden gates for homeowners across Bristol, Bath, and Portishead, giving each property a new gate built to its own opening rather than an off-the-shelf size.
Every gate we produce is handmade to order, built specifically for the opening it needs to fill rather than adjusted from a standard size. This approach means the finished gate sits properly within its frame from day one, without the gaps or trimming often needed to fit a mass-produced gate to an existing boundary. It also means we can accommodate awkward openings, sloped ground, or non-standard widths that an off-the-shelf gate simply wouldn’t fit.
We can supply and install a new gate as part of a wider commercial or domestic fencing or turfing project, or fit one on its own where the surrounding fence or wall is already in good condition. Either way, the gate is built to match the property, taking into account the height, width, and style of the boundary it sits within, as well as the direction it needs to open and any latch or lock preferences.
Bespoke Gates Built to Suit Your Boundary
Bespoke gates give homeowners control over details that a standard product simply doesn’t offer, including height, board spacing, and finish. The surrounding boundary might be decorative garden fencing or a more solid privacy screen, and we design each gate to complement it rather than looking like an afterthought.
Because every gate is bespoke, it can also be sold on its own for clients who already have suitable fencing or posts in place and just need a well-built gate to complete the boundary. This makes wooden gates a practical option even outside a full fencing project, and it’s one of the more common reasons clients get in touch with us directly.
Featheredge Timber and Treated Rails
Most of our handmade gates are built using featheredge timber, the same overlapping board style used in much of our fencing, which gives a consistent look where a gate sits alongside an existing fence line. The boards are fixed to treated rails, providing the internal frame that keeps the gate square and prevents sagging over time.
Treated timber is used throughout the frame and boards to resist rot and reduce maintenance, since a gate is exposed to more movement and weather than a static fence panel. Depending on the property, we can supply:
- Featheredge board gates to match existing fencing
- Solid board gates for maximum privacy
- Picket-style gates for a more open, decorative finish
- Wider gates for driveways and vehicle access
Supply Only or Supply and Install
Not every client wants a full installation. We offer a supply only option for those who prefer to fit the gate themselves, alongside a complete service covering delivery and installation for clients who would rather leave the job to us. This mirrors how our wider fencing supplies and delivery service works, giving clients the same flexibility for fencing materials and a new gate alike.
Both routes use the same handmade construction, so the standard of the gate itself doesn’t change depending on which option is chosen. A supply-only client receives exactly the same handmade gates we install ourselves, built to the same specification and finished to the same standard.
Estimates, Site Surveys, and Delivery
Before any wooden gate is built, we carry out a site survey to confirm the exact opening size, post condition, and any ground level changes that might affect how the new gate hangs. This step avoids the fitting issues that can occur when a gate is ordered from measurements taken without seeing the site.
Following the survey, we provide an estimate covering the gate itself along with delivery, and installation if required. Delivery is arranged in the same way as our fencing supplies and delivery service, bringing the finished gate directly to the property once it’s built, ready to fit into an existing boundary or a new run of fencing.
FAQs -Wooden Gates
Because each gate is handmade to order, timescales vary, but most bespoke gates are ready within a few weeks of the site survey being completed.
Yes. Wooden gates can be sold on their own for clients who already have suitable posts or fencing in place and only need a new gate.
Our gates are typically built using featheredge timber boards fixed to treated rails, matching the material commonly used in our fencing.
We offer both. Wooden gates can be supplied and delivered on their own, or delivered and installed as part of a complete service, across Bristol, Bath, and Portishead.
Get in Touch
For handmade wooden gates across Bristol, Bath, Portishead, or the surrounding areas, get in touch with our team to arrange a site survey. We also offer fencing supplies and delivery if your project includes new fencing alongside the gate. Call 07488 277053 for an estimate.